30
Aug

The inverter is mounted

Written by admin. Posted in Power Inverter

This mount is secure. All axis are firmly supported to prevent mechanical resonance. The Drive motor will fill the hole below with 3/4 inch minimum clearance around it’s body.

 

25
Aug

Compressor/motor is mounted

Written by admin. Posted in A/C Motor/Compressor

The compressor/motor is mounted and the plumbing complete

The vacuum side plumbing, visible with the Inverter removed, goes straight up to connect with the fire wall pass-through fitting.

24
Aug

The heater is mounted

Written by admin. Posted in Fluid Heater

The heater mounts to the inverter’s vertical support element with it’s side mount flange. It hovers about a half inch above the chassis stiffener.

24
Aug

Where contactors will go

Written by admin. Posted in Electrical Enclosure

These large contactors (in the white enclosure) that came with the motor Inverter will be relocated into this odd shaped space.  

We will make an aluminum skinned box to fit. We will use these 2 embedded captive nuts as a mount point on one end and the battery box mount plate on the other. 

Contact us

Phone: (619) 438-0018

EMAIL US