24
Jan

Finished component stack

Written by admin. Posted in Charging System

Here is the mount we fabbed up to mount the charger into the odd shaped battery box:

The lower part of the charger is captured behind the shoulder on the left part of the triangle

01
Jun

Plan changed

Written by admin. Posted in Charging System

The original plan was to combine the DC/DC converter heatsink (presently air cooled) with this water cooled charger, since the cooling resource is available to be shared. Because of the non-square inner compartment shape, the DC/DC converter will not fit, even with it’s air cooled heat sink removed. This will force it to the trunk, mated with the 12V standard battery that it will be delivering current to anyway. There is a good location for it there and will not cause a noise issue from it’s fan since the trunk is isolated from the interior.

24
May

Charger arrived

Written by admin. Posted in Charging System

The Charger arrived on November 22

Contact us

Phone: (619) 438-0018

EMAIL US