Author Archive

24
Jun

Plumbed vacuum pump

Written by admin. Posted in Vacuum Pump

Plumbed vacuum pump (lower right corner) shown without motor installed.

24
Jun

Final working result

Written by admin. Posted in Fluid Heater

Here is the final working result:

24
Jun

All links are connected

Written by admin. Posted in Battery Pack

All links are connected and the BMS slave boards are going in:

Notice that there are no longer exposed conductors. We added FR4 in strategic forms that simply pull out for access to the high current module interconnect jumpers.

04
Jun

Final Assembly

Written by admin. Posted in AC Traction Motor

Here is the final assembly of the drive system:

Mount the flywheel and insert the pilot bearing

25
Apr

Radiator / cooling system

Written by admin. Posted in Other Details

Here is the cooling fluid filler inlet that I machined custom for this situation.

The main issue was to secure a hose barb fitting to this radiator inlet. The original radiator cap was on a remote reservoir that I am not using so I needed a compact alternative. As per usual, I had to make it. The gold cap has an O-ring seal. The temperature peaks will not be anything like the original ICE type levels, so will need much less accommodation for thermal expansion.

Contact us

Phone: (619) 438-0018

EMAIL US