Author Archive

24
Aug

Where contactors will go

Written by admin. Posted in Electrical Enclosure

These large contactors (in the white enclosure) that came with the motor Inverter will be relocated into this odd shaped space.  

We will make an aluminum skinned box to fit. We will use these 2 embedded captive nuts as a mount point on one end and the battery box mount plate on the other. 

24
Aug

The pack mounting to the chassis

Written by admin. Posted in Battery Pack

The pack mounting to the chassis begins with inserting the captive stainless nuts inside the chassis. You can see the three holes that were used to install them. 

The green lining is VHB acrylic foam tape, used everywhere in the auto industry. We will be leaving the top adhesive cover on since we do not need the high-strength bond to hold the pack_mounting_foot down since the bolts do that already. This will allow it to come off if needed. This makes a resilient pad that the weight of the pack and inverter sits on.

10
Aug

Update

Written by admin. Posted in AC Traction Motor

We have sent the motor and flywheel to a specialist that will install the flywheel mount on the cut motor shaft.

25
Jul

Air Conditioning compressor

Written by admin. Posted in A/C Motor/Compressor

This unit is from Masterflux, model Sierra 06-0982Y3. 

We get a lot of questions about this unit regarding how/where to purchase. Masterflux has designated the retailer as Revolt Custom Electric Vehicles at: www.revoltcustomelectric.com/components-accessories.html

24
Jul

Vacuum pump is now mounted

Written by admin. Posted in Vacuum Pump

This turned out to be a very simple and robust mount and nicely snuggles with the Air Conditioning compressor. 

Contact us

Phone: (619) 438-0018

EMAIL US