Finished component stack

Written by admin. Posted in Charging System

Here is the mount we fabbed up to mount the charger into the odd shaped battery box:

The lower part of the charger is captured behind the shoulder on the left part of the triangle

Once this frame is bolted in, installing or removing the charger becomes very simple and quick. The two allen head bolts thread into the embedded PEM nuts to anchor it down.


Here is the finished component stack in this location:

Charger, Air Cond 3phase motor controller, AC source power Relay

All three components share in the mounting. The bottom of each box has its own blind shoulder interlock for quick drop-in with two screws holding each top.

Contact us

Phone: (619) 438-0018